MT110 server motherboard is designed around the Intel® E7230 (Mukilteo) chipset which supports the new 8xx sequence Intel Dual-Core processors Pentium D, Pentium 4 Prescott processors, Celeron D and Pentium 4 Extreme Edition series processors with FSB up to 1066MHz. Combining EM64T, PCI-Express, SATA 3Gbps and DDR2 533/667 memory with unassailable quality and performance, these new single-processor solutions are optimized for entry-server platforms.
MT110 is optimized for 1U servers, offers four SATA 3Gbps ports with Intel Matrix Storage Technology which support RAID 0, 1, 5, and 10 to maximize storage reliability and performance, three expansion slots including legacy 32-bit PCI, PCI-Express x8 with x4 signal and PCI-X 133MHz slots to use different kind of add-on cards, Dual Intel® PCI-Express Gigabit Ethernet controller.
|
Model |
IPMI socket |
On-board NICs |
|
MT110 |
Yes |
82573E+V |
|
Processor |
|
- Supports Intel ® Pentium ® D(Dual-Core), Pentium ® 4 Extreme Edition, Pentium ® 4, Pentium ® Extreme Edition & Celeron ® D in LGA775 Package |
|
-Supports Intel UP processors (Prescott/Smithfield/Cedar Mill) LGA775 |
|
- Supports EM64T (Extended Memory 64 Technology) |
|
- Supports Hyper-Threading Technology |
|
- 1066/800/533MHz Front Side Bus |
|
- Onboard 4-phase VRD 10.1 |
|
Chipset |
|
- Intel ® Mukilteo(MCH) E7230 chipset |
|
- MCH + ICH7R + FWH |
|
- SMSC LPC47M182 Super I/O chip |
|
- SMSC EMC6D103 Hardware Monitor chip |
|
Main Memory |
|
- Four 240-pin 1.8V DDR2 SDRAM DIMM sockets |
|
- Dual channel memory bus |
|
- Supports DDR2-533/667 memory |
|
- Supports Un-buffered, ECC type memory modules only |
|
- Supports up to 8GB |
|
- Supports single DIMM operation |
|
System BIOS |
|
- 8MB Flash EEPROM with Phoenix BIOS |
|
- Legacy USB support |
|
- SMBIOS 2.3.3 and DMI 2.0 compliant |
|
- Soft Power-down |
|
- Multiple boot support (with BIOS Boot Specification v3.1 (BBS) support |
|
- ACPI-S3 support (wake up by USB/KB/Mouse/PME) |
|
ICH7R Integrated Serial ATA Controller (3.0Gb/s) |
|
- 4 ports data transfers up to 3.0Gb/s (300MB/s) |
|
- Intel RAID 0, 1, 5, 10 (Support under Windows) |
|
ICH7R Integrated ATA Controller |
|
- Provides one PCI bus master channel for up to two enhanced IDE devices |
|
- Support for UDMA 100/66/33 IDE drives and ATAPI compliant devices |
|
- Tri-state modes to enable swap ba y |
|
ICH7R USB 2.0 |
|
- Six USB 2.0 ports (4 rear panel connectors and 2 front panel headers) |
|
Expansion Slot |
|
- Two PCI-X 64-bit 133/100/66MHz slots (From PXH-V via MCH PCI-E x8) |
|
- One PCI-Express x4 slot for 1U riser card (From ICH7R) |
|
- One 32-bit 33MHz (5V) PCI slot |
|
- Total of three usable slots |
|
Integrated Graphics |
|
- ATI Rage XL with 8M VRAM |
|
Dual Gigabit Ethernet Controllers |
|
- Dual Intel 82573 PCI-Express x1 Gigabit Ethernet Controllers (82573E+82573V) |
|
- RJ-45 connectors with LEDs |
|
- PXE option ROM solution |
|
- Teaming Solution (available when using 82573E+82573V) |
|
- Two 2-pin headers for front panel LED Act. Output |
|
Server Management |
|
- IPMI 2.0 compliance with Arima Scorpio server management card via mini-PCI socket |
|
- Arima SmartWatch server management software |
|
Onboard Super I/O |
|
- SMSC 47M182 Super I/O chip |
|
- One floppy connector supports two drives |
|
- PS/2 mouse and PS/2 keyboard rear panel connectors |
|
- Two 9-pin serial ports (one rear panel connector and one header) |
|
Rear Panel I/O |
|
- Stacked PS/2 mouse and PS/2 keyboard |
|
- One stacked dual USB-2.0 connector |
|
- Two side-by-side RJ-45 connectors with LEDs |
|
- One 9-pin serial connectors |
|
- One DB15 Video connector |
|
Form Factor |
|
- ATX form factor with size: 12” X 9.6” (4 layers) |
|
- P4 12V power connectors (24pin + 8pin) |
Packaging: Retail Box
Included in Package: Motherboard
IDE, SATA cables
Driver CD
Warranty: 90 Days
