Part #: CTGN002 Integral Technologies presents the solution to cost concerns for imaging systems. The FlashBus MV Lite is a PCI bus-mastering video frame grabber that provides quality video images at an amazingly low price. FlashBus MV Lite is a high-speed, very low-cost, PCI bus-mastering frame grabber designed to capture 8 bits-per-pixel monochrome and 24 bits-per-pixel color video in real time to system memory. FlashBus MV Lite was specifically developed for cost-critical applications requiring very high-quality, high-speed image capture such as machine vision, inspection and scientific imaging. Since this board is a member of the FlashBus MV family, any software written for the Lite will also run properly on the Pro and Plus versions — thereby allowing OEMs a tremendous amount of flexibility in the design of a system. Maintaining the Integral tradition of excellence in both hardware and software, FlashBus MV Lite is easy to install and operate. This bus-mastering board works with nearly any machine and any VGA. The available Software Developers Kit is designed for Microsoft Windows 3.1, 95, 98, NT and for OS/2. Should technical support be needed, Integral’s team of engineers is poised to give you immediate attention. Quality and affordability — the hallmark of Integral Technologies’ FlashBus MV Lite. Analog Video Inputs: Composite video connector (BNC) S-Video color input connector (4-pin DIN) Up to 3 composite inputs I/O Control: 1 optically isolated output trigger for flash interface Configurable as 1 TTL input and 1 TTL output Video Format: 24-, 16-, 15-bit RGB or YUV 4:2:2 software selectable Y8 monochrome RGB Video Pixel Format: 888 - 16.7 million colors 565 - 65 thousand colors 555 - 32 thousand colors 8 - 256-level monochrome Video Throughput Performance: Full-size, full-speed video delivery to and from system or VGA memory Full-bandwidth PCI bus master read and write (up to 132 MB/sec) Video Display: Video-in-a-window screen resolution to 640 x 480 (768 x 576 for PAL) 24-, 16-, 15-bit video displayed on up to 1600 x 1200 VGA desktop External Camera Control: Software-controllable, optically isolated, universal strobe interface Physical Size: 76 mm x 125 mm Video Input Cable : Standard composite, S-Video, and RS-170 cables A wide variety of standard and custom cables available. See our Cable Guide for more information. Video Decoder : Accepts NTSC and PAL, composite, and S-Video Genlocks to any NTSC/PAL video source including cameras, VCRs, laser discs, and still video players 24-, 16-, 15-, 8-bit video digitizing Square pixel digitizing resolutions for NTSC (12.27 MHz at 640 x 480) and PAL (14.75 MHz at 768 x 576) Digital control of offset, gain, brightness, contrast, hue, and saturation EEPROM for storing configuration and calibration settings Video Scaling Processor: High-quality still-frame video capture Smooth, high-quality interpolated scaling is performed on video in X (horizontal) and Y (vertical) directions Supports hardware cropping Packaging: Retail Condition: New